CreatBot D600 Pro3 HS — Technical data

The D600 Pro3 HS is the current large-format machine of CreatBot's D600 range. Compared with the Pro2 HS, the build volume has grown to 620 × 620 × 620 mm, the bed now heats to 120 °C, the chamber to 80 °C, and top speed rises to 600 mm/s. Two auto-rising extruders rated to 420 °C with high flow, timed filament drying and network connectivity via Wi-Fi and LAN are included. The chamber heater has its own 3 kW rating in addition to the printer's 2.5 kW.

A used Pro3 HS is still rare and usually young, so clarify invoice, warranty start and transferability with the manufacturer or dealer. The combined connected load of 5.5 kW requires a dedicated, fused supply line. At 250 kg and 1.25 m height, a pallet truck and sufficiently wide doors are needed. Check both extruders, the lifting mechanism, chamber heating to 80 °C and bed flatness across the full area. Ask about firmware versions and the Klipper configuration so that custom settings are not lost.