CreatBot D600 Pro — Technical data

In 2018 the D600 Pro extended the D600's large-format concept with a chamber heated to 70 °C, a heated filament compartment and automatic bed levelling. This made polyamide and polycarbonate more reliably printable in the 600 × 600 × 600 mm build volume; with both extruders 540 mm remain in X. Both print heads reach 420 °C, the aluminium bed 100 °C, and a HEPA filter cleans the chamber air. Control is via a 4.3-inch touchscreen and USB stick. CreatBot has gradually developed the model into the HS versions with Klipper firmware, currently the D600 Pro3 HS.

Used D600 Pro machines are relatively common and have often been in service for a long time. Key points are the function of the chamber heater, the condition of the heating elements in the filament compartment and the levelling probe. As the firmware changed several times over the years, ask about the version and any modifications. Check hot ends, nozzles, bed surface and Z lead screws and ask for a large test print that reveals warping. Replace the HEPA filter. The machine weighs 125 kg; check with the manufacturer how far Pro2 HS parts are interchangeable.