CreatBot D600 — Technical data

The D600 marked CreatBot's entry into large build volumes in 2016: an enclosed cube frame surrounds a 600 × 600 × 600 mm print volume, and two direct-drive extruders print at up to 120 mm/s. The right print head reaches 420 °C, the left 260 °C and the bed 100 °C. The chamber is enclosed but not heated, which is why the manufacturer recommended the machine mainly for ABS, PETG and carbon-filled filaments. In 2018 it was followed by the D600 Pro with heated chamber and material drying, which is being developed further through the HS generations today.

A used D600 is usually many years old, so condition and spare parts matter more than features. Check the large aluminium bed for warping, the manual levelling, the Z-axis bearings and lead screws, and both hot ends. Many units were retrofitted with a levelling sensor or other nozzles; ask about this. At 125 kg and almost 1.1 m tall, transport needs a pallet. Ask CreatBot or dealers about spare parts in advance, as the model is no longer listed. Document controller and firmware version.