Stratasys F3300 — Technical data

The F3300 is Stratasys' FDM production system with a build volume of 600 × 600 × 800 mm. At its core is an automatic tool changer with four extruders that can print at different resolutions or stand in for one another; four spools totalling 16,400 cm³ are dried on board. It processes ASA, PC, Nylon 12CF with a hardened hot end, and ULTEM 9085, 9085 CG and 1010, with soluble or breakaway support. Two cameras monitor the extruders and the build chamber. The machine shares its material system with the F870 and is designed for repeatable production with little operator effort.

As the F3300 is still relatively new, used units are rare. Key points are runtime, the condition of extruders and hot ends – especially the hardened ones for Nylon 12CF – and whether tool changer and dryers work properly. At 1,360 kg, with 208 V three-phase at 30 A and compressed air at 6.2–7.6 bar, it places demands on the site; a forklift is needed to bring it in. Service contract and software subscriptions should be transferable.