DMG Mori LASERTEC 30 SLM 2nd Generation — Technical data

DMG MORI presented the LASERTEC 30 SLM 2nd Generation in autumn 2018. The build volume stayed at 300 × 300 × 300 mm; new were a closed housing in the so-called stealth design, operation via CELOS with integrated CAM programming and the rePLUG powder module with a closed powder circuit. According to dealers, an ytterbium fibre laser of 600 or 1,000 W works with layers of 20 to 100 µm. Parts can also be built onto pre-milled base bodies. The LASERTEC 12 SLM was developed on its platform; the third generation followed in 2024.

This generation turns up used more often than the other LASERTEC SLM models. Dealers quote around 1.3 tonnes, 17.3 kVA at 400 V and an average argon consumption of about 72 litres per hour at 6 to 8 bar. Before buying, clarify laser power and hours, protective glass, recirculation filters and the number of rePLUG modules, as each module stands for one material. A service record and a test part help the assessment. CELOS and CAM licences are not automatically transferable; DMG MORI should confirm this before the change of owner.