AMT PostPro SF50 — Technical data

The PostPro SF50 is the smaller of AMT's two floor-standing systems for chemical vapour smoothing of polymer parts in series production. The process chamber measures 400 × 300 × 400 mm and holds 48 litres; the consumable comes from a 10-litre canister that the machine recognises via RFID. At 830 × 1,400 × 1,830 mm the housing is the same size as the SF100, and the machine weighs around 800 kg. It can be connected single-phase or three-phase. The SF range appeared in 2019 and was fundamentally redesigned in 2021 to replace the PostPro3D; AMT then quoted about 100 minutes per cycle. Pure and PP versions followed later.

Before buying a used SF50, clarify the exact version, as Pure and PP units use different consumables. Check chamber seals, pumps, cooling and filters for solvent damage and ask to see the cycle count on the control panel. Safety data sheets, the approved process recipes and any remaining canisters belong in the package. Confirm in writing with AMT whether the RFID canisters will be enabled for the new operator. The room must meet extraction and explosion protection requirements.